Mitel MSL/MiCollab Device Configuration

To add a Mitel Standard Linux (MSL) or MiCollab server to Mitel Performance Analytics, you need the following information:

IP address of the server

SNMP configuration information

Administrator account password

If you are using an MSL-based device that is version is 11.0.80 or higher, ensure that the OAuth shared-secret is configured for the device. You can verify this setting in the MSL Service Manager UI; for more information, see the following Knowledge Base article:

https://helpcenter.martellotech.com/s/article/MPA-Configure-a-Consumer-ID-and-OAuth-Shared-Secret-for-MSL-Devices