Configuring Mitel Performance Analytics for Mitel SIP DECT OMM

2.  Supply your email and password to enable administrative functions.

The device properties sheet is displayed.

3.  If necessary, change the name of the Mitel SIP DECT OMM device .

4.  Verify that the suggested Probe is correct. Mitel Performance Analytics preselects a Probe with the fewest container levels between it and the device. If needed, select a different Probe from the drop-down list.

5.  Enter a description for the Mitel SIP DECT OMM device .

6.  Enter the IP address or FQDN of the Mitel SIP DECT OMM device. If no Probe is used, the IP address or domain name must be reachable from Mitel Performance Analytics. If a Probe is deployed, the IP address or domain name must be reachable from the Probe.

7.  Enable fault and performance monitoring.

8.  Choose the DSCP setting for Ping packets. You can choose from Best Effort (0), High Priority (46), or a variety of Assured Forwarding (AF) or Class Selector (CS) settings.

9.  Select SNMP v1, v2C or v3. Mitel recommends SNMP v2C.

10.  Enter the SNMP configuration information.

11.  Select the type of platform the Mitel SIP DECT OMM device is running on: Linux Server or SIP DECT RFP.

12.  Supply the AXI credentials to log into the Mitel SIP DECT OMM device.

13.  Enable Interface Filtering if required. See "Interface Filter Configuration" for details.

14.  Optionally enable maintenance mode for the device.

15.  Optionally specify the device message.

16.  Click Save to save your changes.

Clicking Save automatically runs a Probe connectivity check and verifies the new configuration.