Configure the following settings:

Name—If necessary, change the name of the MiVoice Border Gateway (K8s).

Probe—Verify that the suggested Probe is correct. Mitel Performance Analytics preselects the Probe that was created by the Flex Deployment Wizard. If needed, select a different Probe from the drop-down list.

Container—If necessary, change the Container where the device is located.

Description—Enter a description for the MiVoice Border Gateway (K8s).

Select the Enabled check box to enable fault and performance monitoring.

Configure the following options:

Collect Voice Quality—Select the check box to enable the collection of voice quality statistics for SIP Teleworker sets and for SIP trunks.

Enable VQ Threshold—Select the check box to enable voice quality threshold alarms.

Select the Traffic Monitoring check box to enable the collection of SIP trunk statistics.

To enable MiVoice Business IP set inventory, select the Inventory Monitoring check box. You must enable this setting before you can enable Disconnected Set alarms.

To enable the Disconnected Set Alarm, select the check box.

Select the Enabled check box to enable maintenance mode for the device. Enter a message to display when the device is in Maintenance Mode.