Configure the following settings:

Name—If necessary, change the name of the MiCollab (K8s).

Probe—Verify that the suggested Probe is correct. Mitel Performance Analytics preselects the Probe that was created by the Flex Deployment Wizard. If needed, select a different Probe from the drop-down list.

Container—If necessary, change the Container where the device is located.

Description—Enter a description for the MiCollab K8s.

Select the Enabled check box to enable fault and performance monitoring.

Configure the following settings:

SNMP Version—SNMP v1, v2C or v3. Mitel recommends SNMP v1 for MiVoice Business call servers.

SNMP Port

Community String

You must also configure SNMP on the device. For more information, see "MSL/MiCollab SNMP Configuration"

Enable Display Event Stream to display the Event Stream panel on the device dashboard. See "Event Stream Panel" for details.

Select the Port Usage check box to enable the collection of port usage statistics.

Select the Enabled check box to enable port usage reporting. See "MiCollab Audio Web Video Port Usage Reports".

Select the check box to display the Licenses panel on the device dashboard.

Select the Enabled check box to enable monitoring.

Select the Enabled check box to enable maintenance mode for the device. Enter a message to display when the device is in Maintenance Mode.